The Vaso 60x60x100cm is a vase-shaped planter made of corten steel, suitable for all types of gardens.

Corten steel is an extremely durable and timeless type of steel, and this planter is made of Class A Corten steel, which is a metal alloy consisting of iron.

Corten steel is strong, ecological, and fully recyclable.

The rusting process of Corten steel often takes more than 1 year, and the final color also varies each time.

This depends on the specific atmosphere and conditions in which the product is located.

The product is delivered in a gray color, and from that moment, the product begins to discolor.

The final color can change from deep orange to dark brown.

The planter includes a drainage hole.

How long does the rusting process take?

Upon delivery, Geroba's products often do not yet have the beautiful typical orange-brown color.

The formation of the rust layer begins after 2 to 3 weeks and is only complete after approximately 1.5 years.

The alternation between wet and dry weather is important for the formation of the protective layer.

The exact duration depends heavily on the weather and the location where you place the product.

Advantages:

Endless possibilities
No special maintenance of the planter
Combination of strength and durability
Corten steel fits perfectly in both modern and classic gardens
Ecological as it is fully recyclable
Corten steel class A
UV and frost resistant

Optional:

For those who want to accelerate the rusting process, we have optional products, see below.

Information on oxidizing agents that can be used on Geroba's Corten steel products.

Rust accelerator, Spray bottle 0.5L.

Instructions for use:

First, thoroughly degrease the Corten steel product.
Before starting the treatment, allow the product to dry thoroughly.
Then apply undiluted Cortensteel Oxidizer to the surface to be treated.
Allow the agent to work.

Please note:

No product should remain on a flat work surface! (Place the Corten steel at an angle).

After drying, spray again to achieve an even surface.

After sufficient rust formation (after one day), the surface can be rinsed thoroughly (low pressure) to remove residual product.

If in doubt, first test on a less visible test area.

Optionally, you can also use an oil to treat the Corten steel, see below:

Rust protective oil 1L.

Instructions for use:

Apply the product to a dry surface.
Brush off all dirt, loose rust, and paint.
Degrease the surface if necessary.
Apply Rustfix Oil with a brush or spray gun.
Clean the spray gun after use to avoid clogging.
For outdoor applications, it is best to repeat the treatment annually.

Dosing - Consumption:

Use pure - 12 to 24m²/L product, depending on the surface.

Application temperature - Drying time:

Apply the product when the temperature is at least 10°C.
For best results, allow 12 to 48 hours of drying time, depending on the ambient temperature.

Specifications:

Corten steel (delivered unoxidized)
2 mm thick walls, reinforced with welded reinforcements for larger vessels
Reinforced corners
Drainage hole for water evacuation
Feet 15 mm
High frost resistance
Double-folded edges 50 mm wide
Equipped with reinforcing ribs
Natural material
Length: 60 cm
Width: 60 cm
Height: 100 cm
Weight: 33 kg

Language

Currency

Geroba Flower Box Vaso Corten 60x60x100cm