Dimensionera bastuaggregat – så använder du m³ och kW rätt

Sizing a sauna heater – how to use m³ and kW correctly

To size a sauna heater, you first need to know the sauna's internal volume in cubic meters. Then you need to check how the room's construction affects the heat requirement and compare the result with the volume range specified by the manufacturer for the exact heater model.

There are rules of thumb linking kW to m³, but they are not sufficient for final sizing. Different manufacturers and models may have different recommended ranges and correction methods.

Step 1: calculate the sauna's physical volume

Calculate the sauna's internal dimensions:

Length × width × height = physical sauna volume in m³

Example: a room that is 2.0 × 2.0 × 2.1 meters has a physical volume of 8.4 m³.

This is the volume you start with. However, this does not automatically mean that a certain number of kW is correct.

Step 2: identify surfaces that may affect the sizing

Glass doors and larger glass panels, stone, brick, concrete, uninsulated walls, and other surfaces that do not function as a well-insulated wooden wall can increase the effective heat requirement.

Manufacturers may use different methods to convert such surfaces into a corrected sauna volume. Therefore, you should use the manufacturer's method for the exact model series you are considering, not add a general number of cubic meters from another guide.

Step 3: match against the model's specified volume range

Once you have the volume to be used according to the manufacturer's method, compare it with the model's recommended minimum and maximum volume.

Two heaters with the same specified kW can be built in different ways and have different specified volume ranges. Therefore, the verified product specification is more important than a general kW table.

Why is "1 kW per m³" not enough?

Approximate rules of thumb often appear in guides and are also used by manufacturers as a first orientation. But they do not individually take into account, for example, glass surfaces, insulation, the shape of the room, or the construction of the model.

Harvia, for example, describes approximately 1 kW per cubic meter as an average starting point for electric heaters, while the power requirement increases with windows, glass, and heat-retaining surfaces. This illustrates why a rule of thumb can be a starting point but does not replace the model's own sizing data.

6 kW or 9 kW – how should you think?

Do not choose between two power ratings simply by rounding the room's physical volume up or down. Instead, do the following:

  1. Calculate the room's physical volume.
  2. Identify surfaces that affect the heat requirement.
  3. Follow the manufacturer's method for corrected volume.
  4. Check the exact volume range for both models.
  5. At the same time, check the electrical connection, mounting method, safety distances, and control system.

If the corrected sauna volume is close to the boundary between models, do not guess. Check the manufacturer's recommendation or ask for help verifying which model is intended for the room.

Sizing of wood-burning heaters

The same basic principle applies: the size and construction of the sauna room must match the heater's specified sauna volume. For wood-burning models, the installation of a chimney or flue, fire protection, and safety distances are also required.

See wood-burning sauna heaters

Sizing of electric heaters

For electric heaters, in addition to the volume, you need to check the electrical connection for the specific model. Power in kW does not in itself indicate which fuse, voltage, or cable dimension is required.

Fixed electrical installation must be carried out according to current electrical safety requirements. Have a registered electrical installation company assess the actual installation when fixed electrical work is required.

See electric sauna heaters

Harvia Cilindro electric sauna heater

Checklist for correct sizing

  • Internal length, width, and height are measured.
  • Physical volume in m³ is calculated.
  • Glass and other heat-affecting surfaces are identified.
  • The manufacturer's correction method is checked.
  • The exact model's min/max volume is verified.
  • Installation, control, and safety distances are possible in the room.

Next steps

Compare sauna heaters →

Do you first need to determine which type of heater is suitable? Read Which sauna heater do I need? or compare electric and wood-burning sauna heaters.


Please note, comments must be approved before they are published

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.