A good sauna build doesn't start with the paneling or the heater. It starts by determining where the sauna will be located, how large it will be, and what technical conditions the site has. Once those decisions are clear, it becomes easier to choose a construction, interior, and products that work together.
The guide is a planning overview. Construction, electricity, fire protection, the chimney, and other technical parts must always follow current regulations, product-specific instructions, and the appropriate professional expertise.
1. Determine the type of sauna project
Start by defining whether you will:
- build a sauna room in an existing building,
- fit out or renovate an existing sauna,
- build a freestanding sauna,
- choose a prefabricated or modular sauna building.
The project type affects which construction, moisture, fire, electrical, and installation issues need to be addressed.
2. Check current regulations for the location
Building regulations and permit/notification requirements can change. For example, Boverket updated its guidance following changes to the Planning and Building Act that came into effect on December 1, 2025.
Therefore, base your plans on Boverket's current information and your municipality's assessment for that specific property. Do not reuse older general Attefall or Friggebod regulations as if they automatically apply to today's projects.
3. Measure the room and plan the layout
Measure the interior length, width, and height, and sketch in the door, benches, heater, and walking area at the same time. It is not enough for everything to fit on paper – the heater's safety distances and installation space must also be accommodated.
Plan how people move in and out of the sauna and avoid solutions where the passage becomes cramped near the heater.
4. Plan the construction and surface layers as a system
Walls, ceilings, floors, and connections need to be built to withstand the sauna's temperature and moisture loads. Which materials and layers are suitable depends on the construction and the project's conditions.
Do not choose paneling or interior materials in isolation from the rest of the wall. Ensure that the entire construction is designed for a sauna environment before the surface layers are installed.
5. Size the sauna heater for the room
First, calculate the sauna's interior volume. Then, glass and other surfaces that affect the heat requirement need to be handled according to the current manufacturer's sizing method.
Size sauna heaters using m³ and kW →
Once the sizing is complete, you can choose between an electric sauna heater and a wood-burning sauna heater based on the installation conditions.
6. Plan the installation before the interior is finalized
An electric heater needs the correct electrical installation. A wood-burning heater requires a well-thought-out chimney/flue and fire protection solution. Both require product-specific safety distances.
Therefore, determine the heater's location and technical requirements before the benches and fixed details are fully built.
See the checklist before installing a sauna heater
7. Plan the ventilation
Ventilation is part of the sauna's function and should be planned together with the room's construction and heating system. The solution for supply and exhaust air may differ depending on the sauna type and heater.
Follow the design for the specific sauna and the heater manufacturer's instructions. A general vent placement is not a reliable substitute for the specific solution.
8. Plan benches and seat height based on the room
Benches should work both ergonomically and in conjunction with the heater's location. Start with the room's dimensions and plan seating and lying areas, passage, and access for cleaning.
The heater's safety distances must not be compromised when benches or railings are adapted.
See sauna benches and modules →
9. Plan lighting and control early
Cable routing, transformers, control systems, and the placement of fixtures are significantly easier to address before the walls and ceiling are finished. Products used in a sauna need to be intended for the correct environment and installed according to their instructions.
If the heater requires separate control, the control panel, sensors, and any safety components must also be included in the plan.
10. Check the sauna door, floor, and practical details
The door's location and opening direction affect the floor plan. The floor needs to work with the room's construction, cleaning, and any water management. Also plan protection, railings, and other details where they are needed for the chosen solution.
11. Add accessories last – but plan the requirements early
A bucket, ladle, thermometer, textiles, and other accessories can be chosen once the sauna's basic system is complete. However, it is wise to determine in advance where they will be stored and how the areas near the heater will be kept clear.
Pre-ordering checklist
- The project type and location are determined.
- Current permit/notification requirements are checked.
- Interior dimensions and floor plan are finalized.
- Construction and materials are designed for a sauna environment.
- Ventilation is planned.
- The heater is sized for the correct sauna volume.
- Electricity or chimney/flue is verified as feasible.
- Safety distances are included in the floor plan.
- Benches, the door, and lighting work with the heater's location.
- Control systems, sensors, and sauna stones are matched to the model.
Explore Sauna at VillaHome
If the heater is your next decision, continue with Which sauna heater do I need?.



Leave a comment