Styrning till bastuaggregat – välj rätt kontrollpanel

Control for sauna heater – choose the right control panel

A control panel is not automatically compatible just because it is from the same brand as the sauna heater. The control system must match the exact heater, model series, and system. Therefore, start with the heater's model designation and then check which control system and components the manufacturer specifies.

Built-in or separate control system?

Built-in control system

Some heaters have controls or electronics integrated into the heater itself. In this case, basic temperature and time functions may be available without a separate control panel.

Separate control panel

Other heaters are designed for external control. Depending on the system, a control panel, power unit or main module, temperature sensor, door sensor, and other components may be required.

What is included varies. Always check the exact scope of delivery for the product instead of assuming that the panel, sensors, or control unit are included.

SAWO Innova Stainless Touch control panel for sauna

How to check compatibility

  1. Identify the exact model and power variant of the heater.
  2. Check which control systems the manufacturer lists as compatible.
  3. Check whether a separate power unit or control unit is required.
  4. Check which sensors and safety components the system requires.
  5. Check where the panel and sensors can be placed according to the installation instructions.

If any of these points are missing from the product information, compatibility should be verified before ordering.

Placement of control panel and sensors

Placement is product-specific. The temperature sensor must be located where the system's installation instructions specify so that the control system can measure correctly. Control panels may also have specific rules regarding whether and where they can be mounted inside the sauna.

For example, Harvia states for its digital panels that certain panels can be placed in the sauna within specified limits, while exact safety distances and heights must be followed. Therefore, never use a general placement for all systems.

Remote control requires more than Wi-Fi

If a system can be started remotely, safety features may be mandatory. Harvia, for example, describes solutions where door sensors and/or safety switches are used to prevent remote starting when conditions are not safe.

This does not mean that the same component applies to all heaters. Check the exact combination of heater, control system, and safety equipment approved by the manufacturer.

Narvi Smart control panel with WiFi for sauna

Common mistakes when choosing sauna controls

  • Choosing a panel based on appearance without verifying model compatibility.
  • Overlooking the need for a separate control unit or power unit.
  • Assuming that temperature sensors or door sensors are included.
  • Planning the panel's placement before checking the installation requirements.
  • Choosing remote control without checking the safety components.

What does the electrician need to know?

For electrical systems, the installer needs the product-specific documentation for the heater and control system. Power, connection, sensors, and control components should be assessed as a system. Fixed electrical installations must be carried out in accordance with current electrical safety requirements.

Next steps

See sauna controls and control panels →

Haven't chosen a heater yet? Start with Which sauna heater do I need?. Then the control system can be verified at the same time as the model selection.


Please note, comments must be approved before they are published

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.