Connection piece for mounting several modules of Honni wood storage.
Length x Width x Height - Weight: 385 x 925 x 50 mm - 4 kg
Only the mounting bracket is included with purchase, not the wood storage unit.
How long does the rusting process take?
- Upon delivery, Geroba's products often do not yet have the beautiful typical orange-brown color.
- The formation of the rust layer begins after 2 to 3 weeks and is only completed after approximately 1.5 years.
- The alternation between wet and dry weather is important for the formation of the protective layer.
- The exact duration depends heavily on the weather and the location where you place the product.
Optional:
For those who want to speed up the rusting process, we have optional products, see below.
Information on oxidizing agents that can be used on Geroba's Corten steel products.
- Rust accelerator, Spray bottle 0.5L.
Instructions for use:
- First, thoroughly degrease the Corten steel product.
- Before starting the treatment, let the product dry thoroughly.
- Then apply undiluted Cortensteel Oxidizer to the surface to be treated.
- Allow the agent to work.
Please note:
No product should remain on a flat work surface! (Place the Corten steel at an angle).
After drying, spray again to achieve an even surface.
After sufficient rust formation (after one day), the surface can be thoroughly rinsed (low pressure) to remove any remaining product.
If in doubt, first test on a less visible test area.
As an option, you can also use an oil to treat the Corten steel, see below:
- Rust protection oil 1L.
Instructions for use:
- Apply the product to a dry surface.
- Brush off all dirt, loose rust, and lacquer.
- Degrease the surface if necessary.
- Apply Rustfix Oil with a brush or spray gun.
- Clean the spray gun after use to avoid clogging.
- For outdoor applications, it is best to repeat the treatment annually.
Dosage - Consumption:
- Use neat - 12 to 24m²/L product, depending on the surface.
Application temperature - Drying time:
- Apply the product when the temperature is at least 10°C.
- For best results, allow 12 to 48 hours drying time, depending on the ambient temperature.
