- Product type: Wood stove
- Fuel: Wood
- Nominal heat output: 6.0 kW
- Heatable area: up to 100 m² according to the manufacturer
- Efficiency: 81%
- Fine particulate matter: 26 mg/Nm³
- Weight (steel version): 130 kg
- Versions: Steel, soapstone or limestone
- Max log length: 33 cm
- Product dimensions (W × H × D): 556 × 1375 × 410 mm
- Heat storage: Model-specific optional extra; not included
- Safety distances rear / side / front: 100 / 100 / 800 mm
- Fresh air connection: Ø100 mm
- Flue connection: Ø150 mm
- Interior lining: Refractory concrete
- Air control: Primary and secondary air
- Ash management: Concealed ash container
Versions and item numbers
| Lining | Item number | SKU | EAN/GTIN |
|---|---|---|---|
| Steel | 30007305 | KAM-30007305 | 3859893103773 |
| Soapstone | 30008080 | KAM-30008080 | 3859893103957 |
| Limestone | 30008848 | KAM-30008848 | 3859893103964 |
The Ember E11 builds on the classic E14 model but features a taller, oval fireplace body. The steel-framed glass door gives the fire a prominent place at the front, while the wood storage beneath the firebox makes the wood easy to access without a separate wood basket. For those who prefer a more enclosed look, the wood compartment can be fitted with doors.
The taller design also allows for the addition of a model-specific heat accumulator that stores heat and releases it after the fire has gone out. The accumulator and optional wood compartment doors are separate add-ons and are not included. The E11 is available with black steel, soapstone, or limestone. Inside, the firebox is protected by refractory concrete, and the air supply can be adjusted during combustion.
Choose the E11 over the lower E14 if you want a taller fireplace and the option for additional heat storage. The model can be connected to an external combustion air supply, but the flue duct, floor protection, and safety clearances must be checked against the installation manual before purchase and installation.
Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.
Heat Accumulator in E11
The E11 has space for a model-specific heat accumulator above the combustion chamber. It is a separate optional extra and must be selected in accordance with the manufacturer's approved item and installation instructions. Do not use loose stones or other heat-retaining components without explicit approval for the model. The accessory also affects the choice of flue connection according to the E-series installation manual.
Wood Storage and Air Supply
The open wood storage compartment below the fireplace can be fitted with doors designed for the E11. The doors are not included. Keep ventilation and service openings unobstructed. External combustion air may need to be planned in conjunction with the chimney, especially when other ventilation creates negative pressure in the room.
Installation and Burning
Check the fireplace layout and safety distances using the installation instructions applicable to the supplied E11 version. Use dry, untreated wood, keep the door closed during normal operation, and follow the manual for lighting and fuel quantity. New surfaces may emit odors during the first few firings; heat up gradually and ventilate.
Maintenance
Empty the ash only when the fireplace is completely cold. Clean the glass without abrasive tools and regularly inspect the door seals and fireplace lining. The flue duct and chimney must be kept clean and inspected in accordance with applicable regulations.
Manual
Öppna manual (PDF)Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.
