Geroba Planter Box Belar Corten

The Belar is a planter box made of Corten steel that has 9 practical compartments for placing herbs or plants, as well as a bottom with drainage holes.

Sizes:

Length x Width x Height - kg

80 x 80 x 30 cm - 45 kg

120 x 120 x 30 cm - 85 kg

How long does the rusting process take?

• Upon delivery, Geroba's products often do not yet have the beautiful typical orange-brown color.

• The formation of the rust layer begins after 2 to 3 weeks and is only completed after approximately 1.5 years.

• The alternation between wet and dry weather is important for the formation of the protective layer.

• The exact duration largely depends on the weather and the location where you place the product.

Advantages:

• Endless possibilities
• No special maintenance of the planter box
• Combination of strength and durability
• Corten steel fits perfectly in both modern and classic gardens
• Ecological as it is fully recyclable
• Corten steel class A
• UV and frost resistant

Optional: 

For those who want to accelerate the rusting process, we have options for that, see below.

Information on oxidizing agents that can be used on Geroba's Corten steel products.

• Rust accelerator, Spray bottle 0.5L.

Instructions for use:

1. First, thoroughly degrease the Corten steel product.
2. Before starting treatment, allow the product to dry well.
3. Then apply undiluted Cortensteel Oxidizer to the surface to be treated.
4. Allow the agent to work.

Note:

No product should remain on a flat work surface! (Place the Corten steel at an angle).

After drying, spray again to get an even surface.

After sufficient rust formation (after one day), the surface can be thoroughly rinsed off (low pressure) to remove any remaining product.

If in doubt, first test on a less visible test area.

As an option, you can also use an oil to treat the Corten steel, see below:

• Rust protection oil 1L.

Instructions for use:

1. Apply the product to a dry surface.
2. Brush off all dirt, loose rust, and paint.
3. Degrease the surface if necessary.
4. Apply Rustfix Oil with a brush or spray gun.
5. Clean the spray gun after use to avoid clogging.
6. For outdoor applications, it is best to repeat the treatment annually.

Dosage - Consumption:

• Use pure - 12 to 24m²/L product, depending on the surface.

Application temperature - Drying time:

• Apply the product when the temperature is at least 10°C.
• For best results, allow 12 to 48 hours of drying time, depending on the ambient temperature.

Specifications:

• Corten steel (delivered unoxidized)
• 2 mm thick walls, reinforced with welded reinforcements for larger vessels
• Reinforced corners
• Drainage holes for water evacuation
• Feet 15 mm
• High frost resistance
• Double-folded edges 50 mm wide
• Equipped with reinforcing ribs
• Natural material