Kriss Towel Warmer Tinto

MINIMALIST SIMPLICITY.

Towel dryer with swivel arms, making it extra easy to hang your towels to dry.

The arms can be rotated 180 degrees from side to side, so you avoid having multiple towels hanging on top of each other.

The arms are equipped with practical end pieces that keep the towels in place on the arms.

Tinto can also be used to dry shoes, gloves, and hats, making it very useful in your utility room in addition to your kitchen/living room or bathroom!

The towel dryer can be used anywhere where it can be connected to standard 230V power and installed with either a concealed cable directly into the wall or with a visible cable and plug for an outlet.

PLEASE NOTE, consult your professional for advice on whether concealed installation is possible exactly where you want to install it.

Tinto is controlled with the front-operated regulation, which allows you to set the strength to either low, medium, or high, as well as a quick choice between continuous operation, 3, or 6 hours of operation.

The smallest has a maximum power consumption of 30 watts, while the largest has a maximum power of 53 watts – but you can, of course, regulate it down with the front control.

Available in three heights and two widths.

Delivered in polished stainless steel.

It is possible to use less power by using medium or lowest power!

SUSTAINABILITY.

For Kriss, sustainable production and material recycling are fundamental parts of our product development.

That's why all our electric models are manufactured in stainless steel.

An environmentally friendly material that can be recycled.

Specifications:

DIMENSIONS [HXW]: 625 x 445 mm

• ARMS: 4
• POWER: 30 W

DIMENSIONS [HXW]: 825 x 545 mm

• ARMS: 6
• POWER: 39 W

DIMENSIONS [HXW]: 1025 x 545 mm

• ARMS: 8
• POWER: 53 W

Safety information:

• Provided that the supplied cable with plug is used without modification and is connected to a legally established socket, the product can be connected by any adult.
• Only an authorized electrician may connect the product if the supplied cable or plug is modified and only if the connection complies with the legislation at the specified installation site.
• Only an authorized electrician may make changes to the cable and plug or perform repairs to the cable or plug.
• The product is approved for IP class X4. If the cable or plug is modified, the installer is responsible for ensuring that the specific connection is legal at the location concerned.