- Product type: Wood-burning monoblock insert
- Series/model: Itaca 80 ECO
- Fuel: Wood
- Nominal heat output: 12.0 kW
- Heat output range: 8–16 kW
- Efficiency: 85%
- CO emissions: 0.08%
- NOx: 121 mg
- OGC: 39 mg
- Particulate matter: 20 mg
- Heating volume: 267 m³
- Heating area: 107 m²
- Dimensions (W × H × D): 891 × 1507 × 688 mm
- Firebox (W × H × D): 640 × 525 × 360 mm
- Weight: 255 kg
- Maximum log length: 60 cm
- Flue connection: Ø200 mm
- Exterior material: Steel
- Firebox lining: Thermotte or vermiculite depending on the variant
- Door: Lift-up door/guillotine
- External air supply: Yes
- Ventilation: Centrifugal fan on variants with a turbofan
- Features: Perfect Combustion, double combustion, Easy Fire Control, Extra Clean Glass and Cleaning Access
-
Variants at VillaHome:
- Without turbofan / Thermotte – SKU KAM-304120000000, EAN 1000000091618
- With turbofan / Thermotte – SKU KAM-304125000000, EAN 1000000092134
- Without turbofan / Vermiculite – SKU KAM-304200000000, EAN 3000000075142
- With turbofan / Vermiculite – SKU KAM-304202000000, EAN 3000000075159
- CE marking: Yes. Documentation: declaration of performance (DoP)
Lacunza Itaca 80 ECO combines a tall black steel construction with a wide glass front and a lift-up door. It is the narrowest Itaca model and is ideal when you want a clear view of the fire but need less wall space than for the Itaca 100 or 120.
The firebox can be chosen with Thermotte or vermiculite on the inside, and both are available with or without a turbofan. The fan version uses Eolo for active heat distribution; the model without the turbine lacks this fan function. External air supply can be planned for the installation, and the lift-up door mechanism requires special space in the framing.
The Itaca 80 is the wood-burning monoblock insert itself, not a finished masonry stove with a mantel. Choose it when a lift-up door and a slightly more compact format are more important than an extra-wide firebox. Check the floor's load-bearing capacity, flue, air supply, ventilation openings, and service access before the installation is built in.
Design Options
Choose Thermotte or vermiculite for the firebox lining, and then with or without a fan, depending on whether active heat distribution is required.
Installation
The Itaca 80 is a heavy built-in insert with a lift-up door. The hearth, framing, safety clearances, convection openings, flue connection, and external combustion air must be sized in accordance with the Lacunza manual and applicable Swedish regulations. Allow sufficient service space for the door mechanism and chimney sweeping.
Fan Version
Airways and any hot air ducting must be kept clear. Electrical connection and control must be carried out in accordance with the manual.
Firing
Use dry wood and follow the manufacturer's recommended fuel load. Avoid overloading the fire and protect the Thermotte/vermiculite plates from impact.
Maintenance
Clean the glass, ash compartment, firebox, air intakes, and flue passages only when the insert is cold. Cleaning Access provides access for chimney sweeping. Regularly inspect the door mechanism, seals, and chimney.
