High-quality spa filter made with Reemay Filtration Fabric for the best possible filtration efficiency.
Clean and rinse your spa filter at least every 14 days.
We recommend having two sets of filters available for easy and efficient handling.
Remember to wash your pleated filter regularly for a longer lifespan and more effective spa cleaning.
Always use filter cleaner to dissolve grease and other contaminants.
- Remove the filter(s) from the filter housing and rinse them with water first.
- Then apply filter cleaner from top to bottom and let it work for at least 5 minutes.
- Once the foam has settled, thoroughly rinse the cartridge with a strong stream of water.
The spa filter should be replaced at least every 12 months to maintain optimal filtration capacity.
Filters can vary quite a bit from different manufacturers - with variations from a few to up to 10 mm - but still fit in the same filter housing.
If you can't find your exact measurements, a slightly smaller filter might work instead.
SC730:
Length cm: 27
Length inch: 10.6"
Dia cm: 18
Dia inch: 7.1
Top: 4 x ‘Y’ Clips
Bottom: 5cm Hole with twist lock
Fits the following spas, among others:
- Dimension One Spas
SC802:
Length cm: 10.4
Length inch: 4.1"
Dia cm: 11.2
Dia inch: 4.4
Top: Closed
Bottom: Bayonet
Fits the following spas, among others:
- MSPA filter cartridges two-packed, bayonet mounting.
- This filter cartridge is compatible with all Mspa hot tubs including
- Elegance, Camaro Toscana, Alpine, Blue Sea, Silver Cloud,
- Castello, Oasis and Jet Spa.
Antal: 1st
Kräver montering: Yes
