The Stala N-Seven is a custom-made, full-surface stainless steel sink for kitchens where the countertop depth or space is more limited. It has a full-size single bowl measuring 400 × 340 × 180 mm but can be manufactured with a countertop depth of as little as 400 mm.
For narrower kitchens and smaller spaces
The N-Seven requires a base cabinet of at least 500 mm and combines a practical single bowl with the option of a significantly shallower countertop than several other Seven models. This makes the model suitable for smaller kitchens, kitchen islands, utility rooms, and other areas where standard depths are not suitable.
Depths from 400 to 635 mm
Stala can manufacture the N-Seven in lengths of 480–3000 mm in 5 mm increments. The depths are 400, 450, 500, 550, 590, 600, 610, 620, or 635 mm, and the thickness can be 20, 30, or 40 mm. A depth of 635 mm is an option for IKEA METOD cabinets, among others. The VillaHomes version has a smooth stainless steel surface.
You can choose a flat or raised edge profile. The faucet can be positioned according to your requirements, and VillaHomes' configurator has a dedicated field for the CC measurement from the left.
Faucet hole and hob cutout
A cutout for a kitchen faucet can be ordered at no extra cost and is supplied with reinforcement under the sink. A hob cutout is available as an optional extra. A basket-bottom waste is included as standard.
How to order the correct length
VillaHomes' length selector starts at 800 mm and shows fixed options in 100 mm increments, while Stala can manufacture the N-Seven from 480 mm. For shorter lengths or other exact final dimensions, the correct length option/price should be confirmed before ordering. Then, enter the exact total length in the product's Comments field.
- Product code: N-SEVEN
- Series: Stala Seven
- Product type: Custom-made full-surface sink for narrower countertop-free solutions
- Material: Stainless steel
- Finish at VillaHome: Smooth
- Length: 480–3000 mm, available in 5 mm increments
- Depth: 400, 450, 500, 550, 590, 600, 610, 620 or 635 mm
- Depth 635 mm: Designed for, among others, IKEA METOD cabinets
- Thickness: 20, 30 or 40 mm
- Edge profile: Straight or raised
- Bowl: 400 × 340 × 180 mm
- Minimum cabinet width: 500 mm
- Bowl placement: Custom-sized; center-to-center dimensions specified in the configurator
- Installation: Full-surface top-mount on cabinet
- Standard equipment: Basket waste
- Tap hole: Can be ordered at no extra cost with reinforcement under the countertop
- Cooktop cutout: Optional at an additional cost
- Warranty: 24 months according to Stala
- Country of manufacture: Finland
Ordering and exact length
N-Seven can be manufactured in lengths of 480–3000 mm in 5 mm increments. VillaHomes' length selector starts at 800 mm and shows price/length options in 100 mm increments. For lengths of 480–799 mm or other exact final dimensions, the correct option must first be confirmed. Then, write the desired exact total length in the Comments field.
Depth, thickness and edge profile
Choose a depth of 400, 450, 500, 550, 590, 600, 610, 620 or 635 mm, a thickness of 20, 30 or 40 mm, and a straight or raised edge profile.
Placement of the tap
Specify the placement using the CC dimension from the left field. It requires a base cabinet of at least 500 mm. Also check the space for the trap and connections.
Tap hole and hob cutout
A tap hole with reinforcement can be selected at no extra cost. A hob cutout is a separate optional extra at an additional cost.
Care of stainless steel
Clean with warm water, liquid detergent and a soft cloth or sponge. Rinse and dry the surface after cleaning. Avoid steel wool and coarse abrasives that can scratch the steel.
Documents
Product sheet (PDF)
CE document / declaration of performance (PDF)
Tap holes (PDF)
Space requirements for traps (PDF)
Carbon report (PDF)
