The Stala Monarch T50 is a coloured sink made of 1 mm thick stainless steel with a PVD finish and an integrated mixer area. It is available in anthracite, copper and gold. The spacious bowl measures 500 × 400 × 200 mm and features a colour-matched bottom valve and overflow, as well as R15 corners.
The external dimensions are 565 × 525 × 200 mm, and the model fits worktop cabinets from 60 cm. The MONO rim allows for recessed or flush-mounted installation. Note: this variant with a mixer area is not intended for under-mounting. Check the original drawing and installation instructions before cutting holes.
- Brand: Stala
- Series: Monarch
- Model: Monarch-T50 with mixer area
- Colors: Anthracite, copper or gold (see variant selection)
- SKU, EAN and RSK: MONARCH-T50A – STA-MONARCH-T50A – 6417791244799 – 8090773; MONARCH-T50C – STA-MONARCH-T50C – 6417791244782 – 8090774; MONARCH-T50G – STA-MONARCH-T50G – 6417791244775 – 8090775
- Material: 1 mm stainless steel with PVD coating
- External dimensions (L × W × H): 565 × 525 × 200 mm
- Main bowl: 500 × 400 × 200 mm
- Corner radius: R15
- Base cabinet: At least 600 mm wide
- Installation method: Recessed or surface-mounted (not under-mounting)
- Mixer area: Integrated, hole for mixer
- Overflow and basket waste: Color-matched
- Warranty: 24 months according to Stala
Installation
Follow Stala's original instructions for Monarch and check the hole placement, worktop material, and mounting against the original drawing for Monarch-T50. The model is suitable for worktop cabinets from 60 cm. Monarch-T50 with a mixing area should be installed recessed or surface-mounted, not undermounted. During installation, the sink and PVD surface must be protected from scratches and unsuitable chemicals.
Suitable accessories
Stala specifies WASH-1 drain bowl and WASH-2 drain tray as accessories. Check that a separately selected mixer and surface finish are suitable for the selected Monarch variant.
Care of the PVD surface
For the first use: clean with a mildly alkaline agent (pH above 8), rinse, and dry gently. For everyday use: warm water and liquid dish soap, rinse, and dry. Avoid steel wool, coarse abrasives, chlorine bleach, and strong acids. Follow Stala's special PVD care instructions for stain removal.
Original documents
Stala Monarch installation instructions PT692 (PDF), the model's technical data sheet and dimensional drawing (PDF), and care instructions for the PVD surface (PDF).
