- Product type: Wood stove
- Fuel: Wood
- Nominal heat output: 6.0 kW
- Heatable area: up to 100 m² according to the manufacturer
- Efficiency: 80%
- Fine particulate matter: 23 mg/Nm³
- Weight: 121 kg
- Glass: Three sides
- Dimensions (W × H × D): 552 × 1381 × 409 mm
- Max log length: 33 cm
- Clearance distances side / rear / front: 700 / 130 / 800 mm
- Fresh air connection: Ø100 mm
- Flue connection: Ø150 mm
- Door: Screen-printed glass door
- Handle: Full-height
- Internal lining: Refractory concrete
- Metal plate: 8 mm
- Flue collar: Cast iron
- Prepared for additional heat storage: Yes
- Energy class: A
- VillaHome SKU: KAM-30010225
- EAN/GTIN: 3858893329053
The Ember E15 XL VG extends the oval shape of the E15 series vertically and allows the glass to continue around both sides of the fireplace. This makes the flames visible even when sitting diagonally beside the fireplace. The dark steel profile and long handle give the model a minimalist look despite its considerable height.
What sets the XL version apart from the E15 VG above all else is the option of placing a model-specific heat accumulator above the fireplace. It stores some of the heat and gradually releases it after combustion. The accumulator is a separate optional extra and is not included with the fireplace.
The combustion chamber is lined with fireproof concrete, and the fireplace can receive combustion air via an external connection. With three glass surfaces, the placement must be carefully planned: the flue connection, floor protection, and distance to nearby combustible materials must all comply with the installation instructions.
Installation
Install the stove according to the Ember installation manual and applicable Swedish regulations. The supplier specifies a minimum chimney draft of 12 Pa. The flue system must be airtight and correctly sized, combustible floors must be protected with an approved hearth pad, and the model's safety clearances must be observed.
Combustion air and chimney
The stove can be connected to an external combustion air supply. This is particularly relevant in airtight homes where the ventilation might otherwise affect the chimney draft. Keep air intakes and flue passages clear and ensure that the chimney works properly with the stove's Ø150 mm flue connection.
Three glass surfaces
The front and side glass allow the fire to be viewed from multiple directions. The stove's location must therefore take into account the model's larger side clearances to combustible materials. Carefully place logs in the stove so that the glass and firebox lining are not subjected to impacts.
First firing
Start with smaller amounts of wood and gradually increase the temperature. Materials and surface treatments may emit odors during the first few firings; ventilate the room until these odors have subsided.
Firing
Use dry, untreated wood and follow the manual's instructions for wood quantity and air control. Keep the door closed during normal operation and avoid overfiring. Clean the glass only when the stove is completely cold.
Care and safety
Empty the ash container regularly and inspect the glass, seals, firebox lining, and flue passages. The chimney must be swept at the required intervals. Do not use the stove if the glass is cracked, the seals are damaged, or there are other visible defects.
Thermal storage
The E15 XL VG is prepared for additional heat storage. Use only the model-specific Ember storage unit that is verified for the E15 XL VG, and follow the installation documentation for both the stove and the storage unit.
