- Product type: Wood stove
- Fuel: Wood
- Nominal heat output: 6.0 kW
- Heatable area: up to 100 m² according to the manufacturer
- Efficiency: 81%
- Fine particulate matter: 26 mg/Nm³
- Weight: 130 kg
- Finishes: Steel, soapstone or limestone
- Max log length: 33 cm
- Product dimensions (W × H × D): 556 × 1381 × 412 mm
- Heat storage: Prepared for model-specific accumulator (optional)
- Safety distances rear / side / front: 100 / 100 / 800 mm
- Fresh air connection: Ø100 mm
- Flue connection: Ø150 mm
- Door: Screen-printed glass door
- Handle: Full height
- Interior lining: Refractory concrete
- Metal plate: 8 mm
- Flue collar: Cast iron
- Ash management: Concealed ash container
Finishes and item numbers
| Finish | Item number | SKU | EAN/GTIN |
|---|---|---|---|
| Steel | 30010107 | KAM-30010107 | 3859893103780 |
| Soapstone | 30010751 | KAM-30010751 | 3858893329015 |
| Limestone | 30010844 | KAM-30010844 | 3858893329022 |
The Ember E11 VG has a tall, oval body with a glass door and a long handle that follows the edge of the door. The taller silhouette distinguishes the model from the E14 VG and provides space above the fireplace for a model-specific heat accumulator. This is a separate optional extra that can store heat and release it gradually after combustion; the accumulator is not included.
Below the fireplace is wood storage, and for those who want a more enclosed front, the space can be fitted with doors. These are also optional. The stove is available in black steel, soapstone, and limestone, so the same shape can achieve a more uniform or natural stone look. The combustion chamber is lined with fireproof concrete, and the model has a concealed ash container.
The E11 VG can be connected to an external combustion air supply. Therefore, when comparing it with the lower E14 VG, the main considerations should be height, desired wood storage, and the option for additional heat storage versus the available space in the room. Follow the model's installation instructions for flue connection, hearth requirements, and safety clearances.
Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.
Heat storage is optional
The E11 VG's taller upper section provides space for a model-specific heat accumulator. It is sold separately and is not included with the stove. Check that the selected accumulator is intended for the E11 VG and that both the accessory and the stove are installed according to the correct installation instructions. Do not install other stones or improvised heat storage above the firebox.
Wood storage and placement
The open wood compartment under the firebox can be fitted with separately supplied, purpose-made doors. The compartment must not be used in a way that blocks prescribed air passages or service spaces. The installer must check the firebox layout, flue duct and safety clearances for the delivered model version; different editions of Embers E-series documentation have different technical data.
Burn with the correct air supply
Use dry, untreated wood and follow the model's instructions for lighting, fuel quantity and primary and secondary air. During the first few fires, gradually heat up the stove and ventilate the room if there is any odour. External fresh air can be connected where the building's ventilation requires a separate solution.
Clean the glass and firebox
Wait until the glass, combustion chamber and ash are cold. Wipe the glazed door with a suitable cleaning agent and do not use abrasive tools. Regularly check the seals, ash container, thermal concrete lining and flue passages. Chimney sweeping is carried out in accordance with applicable requirements.
Manual
Öppna manual (PDF)Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.
