- Product type: Wood stove
- Fuel: Wood
- Nominal heat output: 7.0 kW
- Heatable area: up to 100 m² according to the manufacturer
- Efficiency: 81.4%
- Fine particulate matter: 26 mg/Nm³
- Glass: Three sides
- Max log length: 33 cm
- Distance to combustible material (rear / side / front): 180 / 520 / 1150 mm
- Fresh air connection: Ø100 mm
- Flue connection: Ø150 mm
- Prepared for heat storage: Yes
- Internal lining: Refractory concrete
- Door: Screen-printed glass door
- Handle: Full-height
- Dimensions (W × H × D): 528 × 1370 × 528 mm
- VillaHome SKU: KAM-30012379
- EAN/GTIN: 3858893329091
The Ember F11 VG has a tall, rounded fireplace body with glass on the front and sides. Its distinct vertical shape makes it an alternative to the lower F14 VG, especially in rooms where you want to give the fireplace more height without losing visibility of the flames from multiple angles.
The long handle follows the edge of the glass door, and behind it is a firebox lined with heat-resistant concrete. The F11 VG is also prepared for a model-specific heat accumulator above the firebox. The accumulator is a separate optional extra and is not included with the fireplace; it is relevant for those who want to be able to store more heat after combustion.
The fireplace is fueled by wood and has the option of external combustion air. The glazed sides mean that the placement needs to be planned with consideration for surrounding walls, furniture, and the flue. Therefore, do not choose based solely on appearance, but also check the safety distances in the installation instructions.
Installation
Install the stove according to the Embers installation manual and applicable Swedish regulations. The supplier specifies a minimum chimney draft of 12 Pa. The flue, firebox liner, and distances to combustible materials must be designed according to the specific model.
Combustion air and chimney
The stove has a Ø100 mm connection for external combustion air and a Ø150 mm flue connection. In airtight houses, a planned supply air solution is important to prevent the ventilation from counteracting the chimney draft. Air intakes and flue passages must be kept clear.
First firing
Start with smaller amounts of wood and gradually increase the temperature. Ventilate if paint and materials emit odors during the first firings.
Firing
Use dry, untreated wood and follow the manual's instructions for wood quantity and air control. Keep the door closed during normal operation and avoid overfiring.
Care and safety
Allow the stove to cool completely before cleaning. Empty the ash container regularly and inspect the glass, seals, firebox liner, and flue passages. The chimney must be swept at the prescribed intervals. Do not use the stove if the glass is cracked or if there are other visible damages.
Three glass surfaces
The front and side glass provide visibility of the fire from multiple angles. The placement should therefore be based on the model's specified side distance to combustible materials. Place wood in carefully and clean the glass only when the stove is cold.
Heat accumulator
F11 VG is prepared for the Embers model-specific heat accumulator. Use only the accumulator that is verified for F11 VG and follow the installation documentation for both products.
